Design Rule Verification Report

Warnings	:	0
Rule Violations	:	0

Summary

Warnings	Count
Total	0

Rule Violations	Count
Clearance Constraint (Gap=0.25mm) (InPolygon),(All)	0
Short-Circuit Constraint (Allowed=No) (All),(All)	0
Un-Routed Net Constraint ( (All) )	0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)	0
Hole Size Constraint (Min=0.0254mm) (Max=5mm) (All)	0
Hole To Hole Clearance (Gap=0.01mm) (All),(All)	0
Minimum Solder Mask Sliver (Gap=0mm) (All),(All)	0
Silkscreen Over Component Pads (Clearance=0mm) (All),(All)	0
Silk to Silk (Clearance=0mm) (All),(All)	0
Net Antennae (Tolerance=0mm) (All)	0
Width Constraint (Min=0.2mm) (Max=1mm) (Preferred=0.2mm) (All)	0
Clearance Constraint (Gap=0.2mm) (All),(All)	0
Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)	0
Total	0